View 2-28UNEF-2B_7000380.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a-72 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a itt cannon is the foremost manufac- turer of ms and ms type connectors with the widest range of connector styles, sizes and variations in the industry. these connectors utilize the finest materials, which, along with precision manufacturing and rigid quality control, assure itt cannon customers of the finest quality con- nectors. the ms a & b product line has environmentally safe green and black zinc alloy plating. the black zinc plating is rohs complaint. the plating is a high quality, uniform fin- ish. the contact, which are preloaded in the insulator, have been redesigned such that the solder cups remain in the proper orientation and will not rotate during wiring termina- tion. the contacts are machined for strength and durability and plated with silver. the cannon ms a&b design meets the performance requirements of the mil-c-5015. the product is available in all the popular sizes and configurations available in class a (solid end bell) and class b (split end bell) versions. applications: ? industrial controls ? test equipment ? traffic signals ? bus systems ? high strength aluminum alloy connector ? high strength plastic insulators ? environmentally safe shell finishes ? protected against corrosion ? high quality plating finish ? threaded coupling ? product is tooled and available in 50 insert patterns ? machined contacts ? low cost ? ul recognized temperature range: C55c to 125c (-67f to 257f) current rating: 13 a to 150 a* durability: 500 mating cycles min. wire accommodation: 0 to 20 awg* no. of contacts: 2 to 48 termination: solder *depending on contact size. hsinif lairetam noitpircsed green zinc standard, black zinc (rohs), od cad yolla munimula llehs citsalp drah rotalusni revlis yolla reppoc ro ssarb tcatnoc electrical service data test current ratings of contacts and allowable voltage drop under test con- ditions when assembled as in service are shown below. maximum total cur- rent to be carried per connector is the same as the allowable in wire bundles as specified in mil-w-5088. contact test current potential drop size (amps) (millivolts) 16 13 49 12 23 42 84 6 2 8 48 0 2 3 0 150 21 high potential test voltage ms connectors show no evidence of breakdown with the test voltage given below is applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute. test air creepage ms voltage suggested* spacing distance service (rms) operating voltages nom. nom. rating 60 cps dc ac (rms) (inches) (inches) inst. 1000 250 200 1/16 a 2000 700 500 1/16 1/8 d 2800 1250 900 1/8 3/16 e 3500 1750 1250 3/16 1/4 b 4500 2450 1750 1/4 5/16 c 7000 4200 3000 5/16 1 *as indicated in previous ms specification and to be used by designer only as a guide. ca /ms a&b product features and benefits performance specifications materials and finishes ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 72
a-73 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ca/ms 3100a wall mounting recepta- cles are used to carry wires through walls or bulkheads, or to provide the means of disconnection at a bulk- head. ca/ms 3100a receptacles mate with ca/ms 3106 and 3108 plugs. ca/ms 3101a cable connecting receptacles are used for cable extension requirements where mounting provisions are unnecessary. ca/ms 3101a plugs mate with 3106a/b and 3108b connectors. note: the d revision of mil-c-5015 has changed the nomenclature of the 3101 from receptacle to plugs. ca/ms 3102a box mounted recepta- cles are used in junction boxes or as an integral part of equipment. ca/ms 3102a receptacles will mate with 3106 and 3108 plugs. ca/ms 3106a straight plug utilizes a solid endbell. the ca/ms 3106a mates with 3100, 3101, and 3102 connectors ca/ms 3106b is identical to the 3106a straight plug except it utilizes a split endbell. ca/ms 3106b mates with 3100, 3101, and 3102 connec- tors. ca/ms 3108b 90 angle plugs are used where there is limited space ad where wires must be brought at abrupt angles. this plug will mate with 3100, 3101, and 3102 connec- tors. ms a&b introduction ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 73
a-74 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a how to order series prefix ms C complies with military specification mil-c-5015 ca C cannon prefix car C rohs compliant (black zinc only) shell style 3100 C wall mounting receptacle (a version only) 3101 C cable connector receptacle (a version only) 3102 C box mounting receptacle 3106 C straight plug 3108 C 90 angle plug (b version only) class a C solid or one-piece endbell b C split or two-piece endbell shell size coupling thread diameter in sixteenths of an inch contact arrangements refer to page b-5 contact type p C pin s C socket alternate insert positions refer to page 4 modifications a206 (rohs) black zinc plating contact cannon for other options. for more information, please contact your local cannon sales of?ce. ca /ms a&b ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 74
a-75 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only ca /ms a&b contact cavity arrangements 10sl-3 10sl-4 12s-3 14s-1 14s-2 14s-5 14s-6 14s-7 14s-9 16-9 16-10 16-11 a service rating aaa a a aa a inst. inst. inst. a a a (b,c,f,g) inst. (all others) d inst. a a a da add d a a a a a (c-f) d (a,b,g,f) daa d a d d (h) a (all others) a d (g) a (all others) aa aa a inst. aa a a 3 - #16 2 - #16 2 - #16 3 - #16 4 - #16 5 - #16 6 - #16 3 - #16 2 - #16 2 - #16 (b, d) 3 - #12 2 - #12 2 - #12 (a, c) 16s-1 16s-8 18-1 18-4 18-5 18-8 18-9 18-10 18-11 18-12 7 - #16 5 - #16 10 - #16 4 - #16 1 - #16 (a) 7 - #16 (a-g) 5 - #16 (b, c, e-g) 4 - #12 5 - #12 6 - #16 2 - #12 (b, c) 1 - #12 (h) 2 - #12 (a, d) 18-20 18-22 20-3 20-4 20-7 20-19 20-27 20-29 20-33 5 - #16 3 - #16 3 - #12 4 - #12 8 - #16 3 - #8 14 - #16 17 - #16 11 - #16 22-2 22-14 22-19 22-23 22-28 24-2 24-10 24-20 3 - #8 19 - #16 14 - #16 8 - #12 7 - #12 7 - #12 7 - #8 9 - #16 (a-d, g-l) 2 - #12 (e, f) 24-28 28-10 28-11 28-12 28-15 28-16 28-21 24 - #16 3 - #12 (a, f, g) 18 - #16 (a-i, n-x) 26 - #16 35 - #16 20 - #16 37 - #16 2 - #8 (b, e) 4 - #12 (j-m) 2 - #4 (c, d) 01-63 8-63 7-63 5-63 61# - 84 )z-z ,x-a( 61# - 64 )s-a ,z-a( 61# - 04 0# - 4 )y( 21# - 1 )z-t( 21# - 7 ** ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 75
a-76 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms3100a ca/car 3100a ca /ms a&b wall mounting receptacle - solid endbell itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) * * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 76
a-77 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms3101a ca/car 3101a ca /ms a&b cable connecting receptacle - solid endbell * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) * ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 77
a-78 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ca /ms a&b box mounting receptacle itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) ms3102a ca/car 3102a * * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only ca_a1-a163.qxd:layout 1 2/9/11 7:49 pm page 78
a-79 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ca /ms a&b straight plug - solid endbell itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) ms3106a ca/car 3106a * * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 79
a-80 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ca /ms a&b straight plug - split endbell itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) ms3106b ca/car 3106b * * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 80
a-81 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change a ca /ms a&b 90 angle plug - split endbell itt cannon hardware kit no. (black zinc) itt cannon hardware kit no. (green zinc) ms3108b ca/car 3108b * * 10sl is available in the following configurations only: 3100, 3101, 3102, pin contacts only and 3106 and 3108 socket contacts only circular ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 81
a-82 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a cable clamps are available in both the environmentally safe green zinc and black zinc, and will accommodate shell sizes 10sl-36. double clamping action provides a balanced, positive hold on the wires and greatly reduces moisture transmission, a real benefit in applications that require environ- mental sealing. this clamp is provided with the bushing. for more information on protective caps contact interconnect solutions sales offices. shell size part number green zinc part number black zinc rohs compliant 10sl, 12s ca17711-111 ca17711-103 14s ca17711-112 ca17711-104 16s, 16 ca17711-113 ca17711-101 18 ca17711-114 ca17711-102 20, 22 ca17711-115 ca17711-22 24, 28 ca17711-116 ca17711-105 32 ca17711-117 ca17711-106 36 ca17711-118 ca17711-107 size a l z green zinc black zinc rohs compliant cadmium 4a .811 (20.60) .811 (20.60) 5/8-24inef-2b 995-0002-558 995-0002-280 995-0002-550 6a .969 (24.60) .969 (24.60) 3/4-20unef-2b 995-0002-559 995-0002-281 995-0002-551 8a 1.094 (27.80) 1.094 (27.80) 7/8-20unef-2b 995-0002-560 995-0002-282 995-0002-552 10a 1.89 (30.20) 1.89 (30.20) 1-20unef-2b 995-0002-561 995-0002-283 995-0002-553 12a 1.378 (35.00) 1.378 (35.00) 13/16-18unef-2b 995-0002-562 995-0002-284 995-0002-554 16a 1.693 (43.00) 1.693 (43.00) 17/16-18unef-2b 995-0002-563 995-0002-285 995-0002-555 20a 2.031 (51.60) 2.031 (51.60) 1-3/4-18uns-2b 995-0002-564 995-0002-286 995-0002-556 24a 2.220 (56.40) 2.220 (56.40) 2-18uns-2b 995-0002-565 995-0002-287 995-0002-557 accessories metal protective caps ca /ms a&b alternate insert positions pin front view: shell rotation contact arrangement w? x? y? z? 14s-9 70 145 215 290 16-9 35 110 250 325 16-10 90 180 270 16-11 35 110 250 325 16s-1 80 280 16s-8 170 265 18-1 70 145 215 290 18-4 35 110 250 325 18-5 80 110 250 280 18-8 70 290 18-9 80 110 250 280 18-10 120 240 18-11 170 265 18-12 80 280 18-20 90 180 270 18-22 70 145 215 290 20-3 70 145 215 290 20-4 45 110 250 20-7 80 110 250 280 20-19 90 180 270 20-27 35 110 250 325 contact arrangement w? x? y? z? 20-29 80 280 20-33 35 110 256 325 22-2 70 145 215 290 22-14 80 280 22-19 80 110 250 280 22-23 35 250 22-28 80 280 24-2 80 280 24-10 80 280 24-20 80 110 250 280 24-28 80 110 250 280 28-10 80 110 250 280 28-11 80 110 250 280 28-12 90 180 270 28-15 80 110 250 280 28-16 80 110 250 280 28-21 80 110 250 280 36-5 120 240 36-7 80 110 250 280 36-8 80 110 250 280 36-10 80 125 235 280 contact arrangement w? x? y? z? 10sl-3 10sl-4 12s-3 70 145 215 290 14s-1 14s-2 120 240 14s-5 110 14s-6 14s-7 90 180 270 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 82
a-83 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms-e/f/r/er mil-c-5015 connectors how to order itt cannon is the foremost manufacturer of ms and ms type connectors with the widest range of connec- tor styles, sizes and variations in the industry. these connectors utilize the finest materials, which, along with precision manufacturing and rigid quality con- trol, assure itt cannon customers of the finest qual- ity connectors. these circular connectors were originally designed for aircraft, but are now widely used in many other fields. they are particularly suitable for commercial applications requiring low cost and high reliability . environmental resistant ms-e, ms-f, ms-r, and f80 (solder/crimp termination) ms-e, ms-f and ms-r are similar to ms-a and ms-b connectors but have resilient insulators and wire sealing grommets for extreme environmental condi- tions and high altitude sealing. ms-es and ms-fs have a mechanical cable clamp; the ms-r has a shorter, lighter weight endbell without the cable clamp. both the ms-f and ms-r have o rings to sup- plement the interfacial seal. shells are aluminum alloy. contacts are silver plated copper alloy. the f80 modification (crimp contact termination) is available in e, r, f and bfr styles with resilient insulators . potting er connec- tors (solder contact termination) these lightweight pot- ting connectors provide resistance to salt water, fuels, etc., and will with- stand the effects of high vibration. 3100 and 3106 connectors with plastic potting cups and resilient inserts meet the requirements of ms3103 and ms25183. contacts are silver plated copper or brass. er insulators are resilient; shells are aluminum alloy. a 90o plug (3108er) is also available. accessories accessories to fit fit ms connectors include junction shells, protec- tive caps, dummy or stowage receptacles, cable clamps, telescop- ing bushings. prefix ms - conforms to latest mil-c-5015 revision. ca - cannon designation (for any modification) car - rohs compliant shell style 3100 - wall mounting receptacle 3101 - cable connecting plug 3102 - box mounting receptacle 3106 - straight plug 3108 - 90o angle plug class e - with resilient insulator and integral clamp for cable strain relief f - same as e, however style 3106 with o-ring seal under the coupling nut * when ordering ms3106f to the cannon part number, designate ca06r. shell size 10s, 12s, 14s, 16s, 16, 18, 20, 22, 24, 28, 32 and 36. contact arrangements see pages a-85 to a-89 contact type p - pin s - socket alternate insert position w, x, y and z (omit for normal), see page a-89 modification code a71 - electroless nickel hardware, rohs a176 - contacts hard gold over nickel, rohs a206 - black zinc cobalt hardware, rohs f42 - connector supplied without endbell, grommet and ferrule f80 - snap-in crimp contacts f183 - snap-in crimp contacts for metric conductors dn - ca3106 (plug only), endbell for shrink boot adapter a232 - black zinc cobalt hardware, rohs european version a233 - green zinc cobalt hardware, european version in the latest revision of mil-c-5015, a new class of environment-resistant connectors was added. this new class f connector super- sedes the previous class e connector. the ms3106f has an o ring under the coupling nut. the class e will be available upon request for existing programs, and upon ordering will also bear the e nomenclature on the shell. ms-f and ms-r connectors are designed to operate in the extreme environmental condi- tions of high altitude flight and must be com- pletely sealed to withstand moisture, conden- sation, vibration, corona and flashover caused by high altitude environments. they have resilient grommet with internal restric- tions in the wire cavities which act as o rings around the wires. this allows the wires to slide thru the grommet with a minimum of friction, yet when the ferrule is seated and the endbell tightened it provides a perfect wire seal thru a wide variety of wire diame- ters. this seal at the rear, plus the interfacial seal at the front, effects a completely environ- ment-resistant assembly when the plug is mated to and f or r receptacle. sockets are of the closed-entry type. the temperature range for this connector is - 55oc (67of) to +125o (+257of) and meets the requirements of mil-c-5015. the f80 modification (crimp contact termina- tion) is available in resilient insulators in the e, r, f, and bfr styles, creating a large selec- tion of insert assemblies and hardware. components are identical to the ms-5015 except that the contacts are modified for crimp termination providing and inexpensive crimp contact connector with the proven reli- ability of and complete intermateability with the ms-5015 series. cable clamps have been integrally designed with the endbell on ms-e and ms-f connectors. class r is without the cable clamp . prefix shell style class shell size contact arrangement contact type alternate insert position modification code ms 3106 r 18 - 1 p w * ca 3106 f 18 - 1 s - f80* ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 83
a-84 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 ms-e/f/r materials and finishes shell material aluminum alloy finish o.d. chromate coating over cadmium plating insulator material polychloroprene (resilient) contacts material brass or copper alloy finish silver plate termination tinned solder pot performance and material specifications wiring for class e, f, and r connectors, satisfactory moisture sealing will be obtained if awg and ms wire sizes and insulation outside diameters are governed by this table. contact wire size insulation od limit size (mil-w-5086) (inches) 16 16 thru 20 .064 (1.63) min. to .130 (3.30) max. 12 12 thru 14 .114 (2.90) min. to .170 (4.32) max. 8 8 thru 10 .164 (4.17) min. to .255 (6.48) max. 4 4 thru 6 .275 (6.98) min. to .370 (9.40) max. 0 0 thru 2 .415 (10.54) min to .550 (13.97) max. electrical service data test current ratings of contacts and allowable voltage drop under test conditions when assembled as in service are shown below. maximum total current to be carried per connector is the same as the allowable in wire bundles as specified in mil-w- 5088. contact test current potential drop size (amps) (millivolts) 16 13 49 12 23 42 84 6 2 6 48 0 2 3 0 150 21 thermocouple contacts sizes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in itt cannon connectors. these thermocouple contacts maintain continuity from thermal-sensor leads through a bulkhead of other closures in temperature measuring applications. these contacts for matching lead wires are detailed by the standards of the instrument society of america (isa). isa standards material j and y iron and constantan k chromel and alumel t copper and constantan since the thermocouple connector applications determines the soldering methods and materials to be used, ther- mocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots. thermocouple contacts are supplied only in connectors having resilient insulators. high potential test voltage ms connectors show no evidence of breakdown when the test voltage given below is applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute. test air creepage ms voltage suggested* spacing distance service (rms) operating voltages nom. nom. rating 60 cps dc ac (rms) (inches) (inches) inst. 1000 250 200 1/16 a 2000 700 500 1/16 1/8 d 2800 1250 900 1/8 3/16 e 3500 1750 1250 3/16 1/4 b 4500 2450 1750 1/4 5/16 c 7000 4200 3000 5/16 1 *as indicated in previous ms specification and to be used by designer only as a guide. ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 84
a-85 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 ms-e/f/r contact arrangements (face view pin insert) legend not ms approved. itt cannon proprietary (see itt cannon designed alternative insert positions, page a-90 shell size no. of contacts service rating 8s-1 1 #16 a 10s-2 1 #16 a 10sl-4 2 #16 a 10sl-3 3 #16 a 10sla4 5 #20 a 12s-4 1 #16 d 12-5 1 #12 d 12s-3 2 #16 a 12sa10 4 #16 inst. 14-3 1 #8 a 14s-9 2 #16 a 16-13 2 #12 (a-iron b-constantan) a 16s-4 2 #16 d 16-11 2 #12 a 16-12 1 #4 a 14s-6 6 #16 inst. 14s-5 5 #16 inst. 14s-2 4 #16 inst. 14s-7 3 #16 a 14s-1 3 #16 a 16s-5 3 #16 a 16s-6 3 #16 a 16-10 3 #12 a 16-9 2 #16 (b,d) 2 #12 (a,c) a 16s-8 5 #16 a 16s-1 7 #16 a 18-7 1 #8 b 18-3 2 #12 d 18-12 6 #16 a 18-11 5 #12 a 18-15 4 #12 (a, c-iron; b, d-constantan) a 18-13 3 #12 (b,c,c) 1 #8(a) a 18-10 4 #12 a 18-4 4 #16 d 18-22 3 #16 d 18-5 1 #16(a) 2 #12(b,c) d 18-9 5 #16(b,c,e-g) 2 #12(a,d) inst. 18-8 7 #16(a-g) 1 #12(h) a 18-1 10 #16 a(b,c,f,g) inst. (all others) 18-19 10 #16 a 20-2 1 #0 d 20-23 2 #8 a 20-3 3 #12 d 20-19 3 #8 a 20-15 7 #12 a 20-22 3 #16(b,d,f) 3 #8(a,c,e) a 20-17 1 #16(f) 5 #12(a-e) a 20-8 4 #16(b,c,e,f) 2 #8(a,d) inst. 20-14 3 #12(c,d,e) 2 #8(a,b) a 20a37 itt cannon pos. #8 of 20-4 d 20-24 2 #16 (a,c) 2 #8 (b,d) a 20-4 4 #12 d shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating high volume layouts - readily available from cannon distributors ? a a a a a ab a b a a b b b b b b b b a a a a a a a c c c c c b b b b b b b b b b b a a c c c c c c c c c c c b b a a a a a a a a a a a c c c d d d d d d d d d d d e ef e g e f b b b b b b b b b b b b b c c c c c c c c c c c c c g a a a a a a a a a a a a a b b c a a d d d d d d d d d d d d e e e e e e e e e f f f f g g g g h h h j j i k f f f f d e e f b d bc b b b c c d e b ab c a b c d e f g h j f a b c d e g h j k l m n p r t s v u 20a-48 19 #16 inst. 20a-9 9 #12 d (j) a (all others) 16-7 2 #16 (a, b) 1 #8 (c) a ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 85
a-86 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms-e/f/r/er mil-c-5015 connectors contact arrangements (continued) legend shell size no. of contacts service rating 20-7 8 #16 a(c-f) d(a,b,g,h) 20-16 7 #16(a-g) 2 #12(h,i) a 20-18 6 #16(a,c-e,g,h) 3 #12(b,f,i) a 20-33 11 #16 a 20-11 13 #16 inst. 20-27 14 #16 a 20-29 17 #16 a 22-7 1 #0 e 22-12 3 #16(a,c,d) 2 #8(b,e) d 22-22 4 #8 a 22-10 4 #16 e 22-4 2 #12(a,c) 2 #8(b,d) a 22-9 3 #12 e 22-6 1 #16(b) 2 #8(a,c) d 22-2 3 #8 d 22-11 2 #16 b 22-13 1 #16(e) 4 #12(a-d) a(a-d), d(e) 22-5 4 #16(a,c,d,f) 2 #12(b,e) d 22-15 1 #16(d) 5 #12(a-c,e,f) a(a-c,e,f),e(d) 22-28 7 #12 a 22-18 8 #16 a(c-e) d(all others) 22-23 8 #12 d(h) a(all others) 22-17 8 #16(a-d,f-j) 1 #12(e) d(a), a(all others) 22-20 9 #16 a 24-10 7 #8 a 24-2 7 #12 d 24-12 3 #12(b,d,e) 2 #4(a,c,) a 24-22 4 #8 d 24-9 2 #4 a 22-14 19 #16 a 22-19 14 #16 a 22-27 8 #16(a-h) 1 #8(j) d(j), a (all others) 24-27 7 #16 e 24-6 8 #12 d(a,g,h) a(all others) 24-11 6 #12(a-c,g-i) 3 #8(d-f) a 24-20 9 #16(a-d,g-l) 2 #12(e,f) d 24-19 12 #16 6 #12(b-g) a 24a24 12 #12 a 24-5 16 #16 a 24-7 14 #16(a-m,o) 2 #12(p,n) a shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating ? a a a a a a a a a a a a a a a a a b b b b b b b b c c c c c c c c d d d d d d d d e e e e e e e e e e e e e e e e e a a a a a a a a a a a a a a a a b b b b b b b b b b b b b b b b c c c c c c c c c c c c c c c d d d d d d d d d d d d d d d e e e f f f g g g h h h j j k l m m n n p p r s t u v l k j e e f f f f f f f f f f f f f f f f f j j h h h h g g g g g g g g g g g h h h h h h h i j j j j j j k k k k k l l l l l m m m m n n n o p p s r g g g a a a a a a b b b b b b b b b b b b b b b c c c c c c c c c c c c c c d d d d d d d d d d d e e e e e e e e f f f f g g g h h h j j j j k k k l l l m m m n n n p r s t f f f g g g h j j m l j k h h h not ms approved. itt cannon proprietary (see itt cannon designed alternative insert positions, page a-90 high volume layouts - readily available from cannon distributors ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 86
a-87 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 ms-e/f/r contact arrangements (continued) legend shell size no. of contacts service rating 24-28 24 #16 inst. 28-7 2 #4 d 28-22 3 #16(d-f) 3 #4(a-c) d 28-10 3 #12(a,f,g) 2 #8(b,e) 2 #4(c,d) d(g), a(all others) 28-1 6 #12(a,b,d-f,h) 3 #8(c,j,g) d(a,e,j) a(all others) 28-19 6 #16(a-c,h,l,m) 4 #12(e,g,j,k) a(c,e,g,j,k,l) b(h,m),d(a,b) 28-12 26 #16 a 28-11 18 #16(a-i, n-x) 4 #12(j-m) a 28-16 20 #16 a 28-17 15 #16 a(a-l), b(r) d(m-p) 28-20 4 #16(k-n) 10 #12(a-j,p) a 28-2 12 #16(a,l,n) 2 #12(m,p) d 28-9 6 #16(a,h-m) 6 #12(b-g) d 28-15 35 #16 a for mil equip design, use 28-21 28-21 37 #16 a 28a51 43 #16 a 32-17 4 #4 d 32-1 3 #12(a,c,d) 2 #0(b,e) e(a),d(all others) 32-15 2 #0(a,g) 6 #12(b,c,d,e,f,h) d 32-9 12 #16(c-n) 2 #4(a,b) d 36-4 3 #0 a(b,c),c(a) 32a10 54 #16 a a 32a47 47 #16 32-7 28 #16(a-n,w-z,a-k) 7 #12(o-v) inst. (a,b,h,j) a(all others) 32-8 24 #16(a-l,t-z,a-e) 6 #12(m-s) 2 #8(o,r) a for new mil equip. design, use 32-7 32-6 16 #16(a-o,s) 2 #12(u,v) 3 #8(p,r,t) 2 #4(w,x) a shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating *note: additional layouts are the same as shown but in unique alternate positioins. please consult the factory. a a a a b b b b c c c d d d e e e f f f g g hj kl mnp q rs t uv wx y z a a a a a a a a a a a a a b b b b b b b b b b b b b c c c c c c c c c c c c c d d d d d d d d d d d d e e e e e e e e e e e e e f f f f f f f f f f f f g g g g g g g g g g g g g h h h h h h h h h h h h h j j j i i j j j j j j j i j j j k l l l l l l l l l l k k k k k k k k k k l m m m m m m m m m m m n n n n n n n n n p p p p p p p p p o o q r r r r r r r s s s s s s t t t t t t u u u u u u v v v v v v w w w w w x x x x x y y y z z a a b b c c d d e efgh jk lm a a a a a a a b b b b b b b c c c c c c c d d d d d d d e e e e e e f f f f f g g g g h h h h j j i j g h j l l l l k k k k m m m m n n n n p p o o p p r r r r s s s s t t t t u u u u v v v v w w w w x x x y y y z z z z a a a b b b c c a bc c d d d d e e e e f f f f g g g g h h h h j j j j k k k k l l n p rs mn p qr stuvw xy a a b b c c d e f g hj l k m n l mn p r s tuvwy m z a b d a z y xw v u t s r q p n g f e d c b m l k j h e d ab b a f m k jh g n t ac r aa pu ah afae ad v ak al aj aq apan am as at ar aw av au f a b c d e g h j k l m n p q r t s z y x w v u b d a c 28a-63 9 #12 19 #16 a (e) inst. (all others) 28a-16 5 #16 (a, d-f, j) 4 #4 (b, c, g, h) a (e) inst. (all others) 32a-69 41 #20 20 #16 inst. a a b 32-5 2#0 d not ms approved. itt cannon proprietary (see itt cannon designed alternative insert positions, page a-90 high volume layouts - readily available from cannon distributors ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 87
a-88 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms-e/f/r/er mil-c-5015 connectors contact arrangements (continued) shell size no. of contacts service rating 36-5 4 #0 a 36-6 4 #4(b,c,e,f) 2 #0(a,d) a 36-14 6 #16(k-n,p,q) 5 #12(b,d,f,h,j) 5 #8(a,c,e,g,i) d 36a16 18 #12 (b,c,v,j,k,m,n, r, t-iron; a,d-f,h,l p,s,u-constantan) a 36a46 27 #12 a 36-9 14 #16(a-g,z-f) 14 #12(h-n,s-y) 2 #8(o,r) 1 #4(p) a 36a66 52 #16(a-c,h-ak) 4 #12(d,e,f,g) a 36a34 52 #16 a 36-10 48 #16 a 36-8 46 #16(a-x,z-z 1 #12(y) a 36-7 40 #16(a-z,a-s) 7 #12(t-z) a 36-15 35 #16 d(m), a (all others) 40a33 7 #8(g-n) 6 #4(a-f) a 40-10 16 #16(a,b,e-h,m,n,p q,v-y,b,c) 9 #8(c,d,i,l,o,r,u,z,a) 4 #4(k,j,s,t) a 40a27 60 #16 a 40-56 85 #16 a 48-5 90 #16(a-bl,bn-bt,bw,bx) 1 #8(cd) 9 #12(bm,bu,bv,by-cc,ce) a 44-1 36 #16(a-s,z-t 6 #12(t-y) d shell size no. of contacts service rating shell size no. of contacts service rating shell size no. of contacts service rating ? a bcdefg hj k l m n p q r st u vwx yza b cd e f gh jkm n p q aa ab ac ad ae af ag ah aj ak al am an ap aq ar as at au av aw ax ay az ba bb bc bd be bf bg bh bj bk bl bm bm bp bq br bs bu bv bw bx bt bz by cc cd ca cb ce aa ab ac ad ae af ag aj ak al am an ap ar as at au av aw ax ay az ba bb bc bd be bf bg bj bk bl bnbm bp br bs bu bv bt rs t u vwx y z a 1 24 23 22 21 20 19 18 17 16 15 14 35 50 59 60 54 42 41 53 52 51 36 40 39 38 37 25 43 55 58 49 34 13 2 26 44 56 57 48 33 12 3 4 28 27 45 46 47 32 11 29 30 31 10 5 6 7 8 98 a a b b b c c c d d d e e e f f f g g h h h j j ji k k k l l l m m m n n o n p p r r s s t t u u v v w w x x y y z z a a b b c c d d e f f g g h i h j j k k m m n n o p p qr r s s t t u v w x y z a a a a a a a a a a a a b b b b b b b b b b b c c c c c c c c c c c c d d d d d d d d d d d d e e e e e e e e e e e f f f f f f f f f f f g g g g g g g g g h h h h h h h h h h j j j j j j j j j j i i i i i k k k k k k k k k k l l l l l l l l l l m m m m m m m m m m n n n n n n n n n n o o o o p p p p p p p p p q q q r r r r r r r r r s s s s s s s s s t t t t t t t t t u u u u u u u u u v v v v v v v v w w w w w w w w x x x x x x x x y y y y y y y y z z z z z z z z a a a a a a a a b b b b b b b b c c c c c c c c d d d d d d d d e e e e e e e f f f f f f f g g g g g g h h h h h h l i i i j j j j j k k k k k k m m m m m m n n n n n p p p p p q q r r r r r s s s s s t t t t t u u u u u v v v v v w w w w w x x x x x y y y y z zaa aa ab ab ak aj am ad ad ae ae af af ag ag ac ac z z z ? not ms approved. itt cannon proprietary (see itt cannon designed alternative insert positions, page a-90 high volume layouts - readily available from cannon distributors ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 88
a-89 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 ms-e/f/r ms alternate insert positions normal position ab a b ab ab a b position w position x position y position z all views are looking into front of pin insert of rear of socket insert. contact alternate positions shell arrange- wire degrees size ment size service rating w x y z 8s 8s-1 1 #16 a - - - - 10s 10s-2 1 #16 a - - - - 10sl-4 2 #16 a - - - - 10sl-3 3 #16 a - - - - 12 12-5 1 #12 d - - - - 12s 12s-4 1 #16 d - - - - 12s-3 2 #16 a 70 145 215 290 14 14-3 1 #8 a - - - - 14s 14s-1 3 #16 a - - - - 14s-2 4 #16 inst. - 120 240 - 14s-5 5 #16 inst. - 110 - - 14s-6 6 #16 inst. - - - - 14s-7 3 #16 a 90 180 270 - 14s-9 2 #16 a 70 145 215 290 16 16-7 2#16 a 80 110 250 280 1#8 16-9 2 #16 a 35 110 250 325 2 #12 16-10 3 #12 a 90 180 270 - 16-12 1 #4 a - - - - 16-11 2 #12 a 35 110 250 325 16-13 2 #12 a 35 110 250 325 16s 16s-1 7 #16 a 80 - - 280 16s-4 2 #16 d 35 110 250 325 16s-5 3 #16 a 70 145 215 290 16s-6 3 #16 a 90 180 270 - 16s-8 5 #16 a - 170 265 - 18 18-1 10 #16 a(b,c,f,g) 70 145 215 290 inst.(all others) 18-3 2 #12 d 35 110 250 325 18-4 4 #16 d 35 110 250 325 18-5 1 #16 d 80 110 250 280 2 #12 18-7 1 #8 b - - - - 18-8 7 #16 a 70 - - 290 1 #12 18-9 5 #16 inst. 80 110 250 280 2 #12 18-10 4 #12 a - 120 240 - 18-11 5 #12 a - 170 265 - 18-12 6 #16 a 80 - - 280 18-13 3 #12 a 80 110 250 280 1 #8 18-15 4 #12 a - 120 240 - 18-19 10 #16 a - 120 240 - 18-22 3 #16 d 70 145 215 290 20 20-2 1 #0 d - - - - 20-3 3 #12 d 70 145 215 290 20-4 4 #12 d 45 110 250 - 20-7 8 #16 a(c-f) 80 110 250 280 d(a,b,g,h) 20-8 4 #16 inst. 80 110 250 280 2 #8 20-14 3 #12 a 80 110 250 280 2 #8 20-15 7 #12 a 80 - - 280 20-16 7 #16 a 80 110 250 280 2 #12 20-17 1 #16 a 90 180 270 - 5 #12 20-18 6 #16 a 35 110 250 325 3 #12 20-19 3 #8 a 90 180 270 - contact alternate positions shell arrange- wire degrees size ment size service rating w x y z 20 20-22 3 #16 a 80 110 250 280 3 #8 20-23 2 #8 a 35 110 250 325 20-24 2 #16 a 35 110 250 325 2 #8 20-27 14 #16 a 35 110 250 325 20-29 17 #16 a 80 - - 280 20-33 11 #16 a - - - - 22 22-2 3 #8 d 70 145 215 290 22-4 2 #12 a 35 110 250 325 2 #8 22-5 4 #16 d 35 110 250 325 2 #12 22-6 1 #16 d 80 110 250 280 2 #8 22-7 1 #0 e - - - - 22-9 3 #12 e 70 145 215 290 22-10 4 #16 e 35 110 250 325 22-11 2 #16 b 35 110 250 325 22-12 3 #16 d 80 110 250 280 2 #8 22-13 1 #16 a(a-d) 35 110 250 325 4 #12 d(e) 22-14 19 #16 a 80 - - 280 22-15 1 #16 a(a-c,e,f) 80 110 250 280 5 #12 e(d) 22-17 8 #16 d(a) 80 110 250 280 1 #12 a(all others) 22-18 8 #16 a(c-e) 80 110 250 280 d(all others) 22-19 14 #16 a 80 110 250 280 22-20 9 #16 a 35 110 250 325 22-22 4 #8 a - 110 250 - 22-23 8 #12 d(h) 35 - 250 - a(all others) 22-27 8 #16 d(j) 80 - 250 280 1 #8 a(all others) 22-28 7 #12 a 80 - - 280 24 24-2 7 #12 d 80 - - 280 24-5 16 #16 a 80 110 250 280 24-6 8 #12 d(a,g,h) 80 110 250 280 a(all others) 24-7 14 #16 a 80 110 250 280 2 #12 24-9 2 #4 a 35 110 250 325 24-10 7 #8 a 80 - - 280 24-11 6 #12 a 35 110 250 325 3 #8 24-12 3 #12 a 80 110 250 280 2 #4 24-20 9 #16 d 80 110 250 280 2 #12 24-22 4 #8 d 45 110 250 - 24-27 7 #16 e 80 - - 280 24-28 24 #16 inst. 80 110 250 280 28 28-1 6 #12 d(a,e,j) 80 110 250 280 3 #8 a(all others) 28-2 12 #16 d 35 110 250 325 2 #12 28-7 2 #4 d 35 110 250 325 28-9 6 #16 80 110 250 280 6 #12 d contact alternate positions shell arrange- wire degrees size ment size service rating w x y z 28 28-10 3 #12 d(g) 80 110 250 280 2 #8 a(all others) 2 #4 28-11 18 #16 a 80 110 250 280 4 #12 28-12 26 #16 a 90 180 270 - 28-15 35 #16 a 80 110 250 280 28-16 20 #16 a 80 110 250 280 28-17 15 #16 a(a-l),b(r) 80 110 250 280 d(m-p) 28-19 6 #16 a(c,e,g,j,k,l) 80 110 250 280 4 #12 b(h,m), d(a,b) 28-20 4 #16 a 80 110 250 280 10 #16 28-21 37 #16 a 80 110 250 280 28-22 3 #16 d 70 145 215 290 3 #4 32 32-1 3 #12 e(a) 80 110 250 280 2 #0 d(all others) 32-5 2 #0 d 80 110 250 325 32-6 16 #16 a 80 110 250 280 2 #12 3 #8 2 #4 32-7 28 #16 inst.(a,b,h,j) 80 125 235 280 7 #12 a(all others) 32-8 24 #16 a 80 125 235 280 6 #12 32-9 12 #16 d 80 110 250 280 2 #4 32-15 2 #0 d 35 110 250 280 6 #12 32-17 4 #4 d 45 110 250 - 36 36-4 3 #0 a(b,c) 70 145 215 290 d(a) 36-5 4 #0 a - 120 240 - 36-6 4 #4 a 35 110 250 325 2 #0 36-7 40 #16 a 80 110 250 280 7-12 36-8 46 #16 a 80 110 250 280 1 #12 36-9 14 #16 a 80 125 235 280 14 #12 2 #8 1 #4 36-10 48 #16 a 80 125 235 280 36-14 6 #16 d 90 180 270 - 5 #12 5 #8 36-15 35 #16 d(m) 60 125 245 305 a(all others) 40 40-10 16 #16 a 65 125 225 310 9 #8 4 #4 40-56 85 #16 a 72 144 216 288 44 44-1 36 #16 d 65 125 225 310 6 #12 48 48-5 90 #16 a 65 125 225 310 1 #8 9 #12 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 89
a-90 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ms-e/f/r/er mil-c-5015 connectors itt cannon designated alternate insert positions shell contact wire service available size arrangement size rating position 20 20a-9 9#12 d (j) a (all others) 20 20a-48 19#16 inst. 4 9 28 28a-16 5#16 a (e) 4#4 inst (all others) 2 12 28 28a-63 9#12 a (e) 19#16 inst (all others) 32 32a-69 41#20 20#16 inst 3 8 20 220 21 255 22 290 23 165 24 330 25 235 26 125 2 20 17 12 4 9 8,13 11 6 22 19 5,3 15 21 18 16 14 note: front view of pin insulator rotates as shown. not ms approved. ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 90
a-91 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 40 b min. .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) e max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80) .922 (23.42) .922 (23.42) 1.235 (31.37) 1.360 (34.54) 1.628 (41.35) e min. .102 (2.59) .102 (2.59) .140 (3.56) .140 (3.56) .195 (4.95) .255 (6.48) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .350 (8.89) .468 (11.89) .468 (11.89) .664 (15.87) .694 (17.63) .911 (23.14) k max. .125 (3.18) .125 (3.18) .125 (3.18) .140 (3.56) .140 (3.56) .140 (3.56) .146 (3.71) .146 (3.71) .146 (3.71) .180 (4.57) .180 (4.57) .180 (4.57) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) l max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.68) 2.625 (66.68) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.44) 3.031 (76.99) 3.031 (76.99) 3.281 (84.34) 3.560 (89.66)? l 1 max. 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.322 (58.98) 2.322 (58.98) 2.427 (61.65)? e +.031 -.000 .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.23) .875 (22.23) .875 (22.23) p max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64) 1.150 (29.21) 1.250 (31.75) .970 (24.64) 1.150 (29.21) 1.250 (31.75) 1.450 (36.83) 1.570 (39.88) 1.570 (39.88) 1.880 (47.75) 1.880 (47.75) 2.205 (56.01) 2.400 (60.96) 2.840 (72.14) r .005 .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.562 (39.67) 1.750 (44.45) 1.938 (49.23) 2.188 (55.58) s .031 .875 (22.23) 1.000 (25.40) 1.000 (25.40) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.375 (34.93) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 2.000 (50.80) 2.250 (57.15) 2.500 (63.50) 2.750 (69.85) t + .010 - .005 .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39) .173 (4.39) v max. .840 (21.34) .840 (21.34) .900 (22.86) .900 (22.86) 1.100 (27.94) 1.200 (30.48) .900 (22.86) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.500 (38.10) 1.500 (38.10) 1.740 (44.20) 1.740 (44.20) 2.075 (52.71) 2.300 (58.42) 2.688 (68.28) w max. 1.046 (26.57) 1.046 (26.57) 1.125 (28.58) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.609 (40.87) 1.890 (48.01) 1.890 (48.01) 2.170 (55.12) 2.170 (55.12) 2.656 (67.46) 2.922 (74.22) - ? not to ms specification ms3100e / ms3100f integral cable clamp ca3100e / ca3100e ms3100f wall mounting receptacles are used to carry wires thru walls or bulkheads, or to provide a means of disconnection at a bulkhead. ms3100f receptacles mate with 3106 and 3108 plugs. ms3100e is identical to ms3100f and is available upon request. for new equipment, customer should specify ms3100f. r0013ac r0013sm the ms3100r receptacle is identical in purpose to the ms3100f. the ms3100r features a shorter light weight endbell and mates with 3106 and 3108 plugs. shell size a thread 8s 1/2-28unef-2a 10s 5/8-24unef-2a 10sl 5/8-24unef-2a 12s 3/4-20unef-2a 14s 7/8-20unef-2a 16s 1-20unef-2a 12 3/4-20unef-2a 14 7/8-20unef-2a shell size a thread 16 1-20unef-2a 18 1-1/8-18unef-2a 20 1-1/4-18unef-2a 22 1-3/8-18unef-2a 24 1-1/2-18unef-2a 28 1-3/4-18uns-2a 32 2-18uns-2a 36 2-1/4-16un-2a 40 2-1/2-16un-2a w v a thd. t dia. 4 mtg. holes s typ. r typ. b m l k e p t dia. 4 mtg. holes r typ. s typ. a thd. b m 1 l k mil-dtl-5015 connectors ms-e/f/r wall mounting receptacle a circular performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 91
a-92 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 ms-e/f/r cable connecting plug (receptacle with no mounting flange) ? not to ms specification shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 40 b min. .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) e max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80) .922 (23.42) .922 (23.42) 1.235 (31.37) 1.360 (34.54) 1.628 (41.35) e min. .102 (2.59) .102 (2.59) .140 (3.56) .140 (3.56) .195 (4.95) .255 (6.48) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .350 (8.89) .468 (11.89) .468 (11.89) .664 (15.87) .694 (17.63) .911 (23.14) g max. .844 (21.44) .969 (24.61) 1.062 (26.97) 1.062 (26.97) 1.156 (29.36) 1.281 (32.54) 1.062 (26.97) 1.156 (29.36) 1.281 (32.54) 1.344 (34.14) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 2.000 (50.80) 2.250 (57.15) 2.500 (63.50) 2.750 (69.85) k max. .125 (3.18) .125 (3.18) .125 (3.18) .140 (3.56) .140 (3.56) .140 (3.56) .146 (3.71) .146 (3.71) .146 (3.71) .180 (4.57) .180 (4.57) .180 (4.57) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) l max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.68) 2.625 (66.68) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.44) 3.031 (76.99) 3.031 (76.99) 3.281 (84.34) 3.560 (89.66)? l 1 max. 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.322 (58.98) 2.322 (58.98) 2.427 (61.65)? m +.031 (0.79) -.000 (0.00) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.23) .875 (22.23) .875 (22.23) p max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64) 1.150 (29.21) 1.250 (31.75) .970 (24.64) 1.150 (29.21) 1.250 (31.75) 1.450 (36.83) 1.570 (39.88) 1.570 (39.88) 1.880 (47.75) 1.880 (47.75) 2.205 (56.01) 2.400 (60.96) 2.840 (72.14) s 1 max. .515 (13.08) .640 (16.26) .640 (16.26) .765 (19.43) .890 (22.61) 1.015 (25.78) .765 (19.43) .890 (22.61) 1.015 (25.78) 1.140 (28.96) 1.265 (32.13) 1.390 (35.31) 1.515 (38.48) 1.765 (44.83) 2.015 (51.18) 2.270 (57.66) 2.427 (61.65) v max. .840 (21.34) .840 (21.34) .900 (22.86) .900 (22.86) 1.100 (27.94) 1.200 (30.48) .900 (22.86) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.500 (38.10) 1.500 (38.10) 1.740 (44.20) 1.740 (44.20) 2.075 (52.71) 2.300 (58.42) 2.688 (68.28) w max. 1.046 (26.57) 1.046 (26.57) 1.125 (28.58) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.609 (40.87) 1.890 (48.01) 1.890 (48.01) 2.170 (55.12) 2.170 (55.12) 2.656 (67.46) 2.922 (74.22) - ms3101e / ms3101f integral cable clamp ca3101e / ca3101e ms3101e cable connecting plugs are used for cable extension requirements, where mounting provisions are unnecessary. ms3101e receptacle mate with 3106, and 3108 plugs. note: mil-c-5015 has changed the nomenclature of the 3101 from receptacle to plug. r1013ac r1013sm ms3101r cable connecting plug is identical in purpose to the ms3101e. the ms3101r features a shorter light weight endbell and mates .sgulp 8013 dna ,6013 htiw performance specifications - page xxx contact, ceiling plugs, assembly tools - page xxx contact arrangements - page xxx shell size a thread 8s 1/2-28unef-2a 10s 5/8-24unef-2a 10sl 5/8-24unef-2a 12s 3/4-20unef-2a 14s 7/8-20unef-2a 16s 1-20unef-2a 12 3/4-20unef-2a 14 7/8-20unef-2a shell size a thread 16 1-20unef-2a 18 1-1/8-18unef-2a 20 1-1/4-18unef-2a 22 1-3/8-18unef-2a 24 1-1/2-18unef-2a 28 1-3/4-18uns-2a 32 2-18uns-2a 36 2-1/4-16un-2a 40 2-1/2-16un-2a w g s 1 p v a thd. b m l k e g s 1 p a thd. b m 1 l k performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 92
a-93 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a ? not to ms specification shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 40 e max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80) .922 (23.42) .922 (23.42) 1.235 (31.37) 1.360 (34.54) 1.628 (41.35) e min. .102 (2.59) .102 (2.59) .140 (3.56) .140 (3.56) .195 (4.95) .255 (6.48) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .350 (8.89) .468 (11.89) .468 (11.89) .664 (15.87) .694 (17.63) .911 (23.14) j** max. .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) l max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.68) 2.625 (66.68) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.44) 3.031 (76.99) 3.031 (76.99) 3.281 (84.34) 3.560 (89.66)? l 1 max. 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.322 (58.98) 2.322 (58.98) 2.427 (61.65)? n max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64) 1.150 (29.21) 1.250 (31.75) .970 (24.64) 1.150 (29.21) 1.250 (31.75) 1.450 (36.83) 1.570 (39.88) 1.570 (39.88) 1.880 (47.75) 1.880 (47.75) 2.205 (56.01) 2.400 (60.96) 2.840 (72.14) p 1 max. .844 (21.44) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 2.219 (56.36) 2.469 (62.71) 2.723 (69.16)? v max. .840 (21.34) .840 (21.34) .900 (22.86) .900 (22.86) 1.100 (27.94) 1.200 (30.48) .900 (22.86) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.500 (38.10) 1.500 (38.10) 1.740 (44.20) 1.740 (44.20) 2.075 (52.71) 2.300 (58.42) 2.688 (68.28) w max. 1.046 (26.57) 1.046 (26.57) 1.125 (28.58) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.609 (40.87) 1.890 (48.01) 1.890 (48.01) 2.170 (55.12) 2.170 (55.12) 2.656 (67.46) 2.922 (74.22) - ms3106e / ms3106f ca3106e / ca3106e ms3106f straight plugs mate with 3100, 3102 and 3102 receptacles. ms3106e is available upon request. for new equipment, customer should specify ms3106f. ms3106e is identical to ms3106f except to o-ring under the coupling nut. r6013ac r6013sm ms3106r straight plug is identical in purpose to the ms3106f. the ms3106r has the shorter endbell. this plug will mate with 3100, 3101, and 3102 receptacles. straight plug n j** a 1 l 1 p w a thd. v j** l 1 p e mil-dtl-5015 connectors ms-e/f/r ms3102e / ms3102r ca3102e / ca3102r ms3102e and ms3102r box mounting receptacles are used in junction boxes or as an integral part of equipment. these connectors are identical in construction and will mate with 3106 and 3108 plugs. for new equipment, customers should specify ms3102r. box mounting receptacle x dimension max. solder pot ext. - pin or socket contact size shell size 16 12 8 4 0 8s, 10s, 10sl .534 - - - - 12s, 14s, 16s .518 - - - - 12 .705 .705 - - - 14 .705 .705 .767 - - 16 .705 .705 .767 .767 - 18 .674 .674 .736 .736 - 20, 22 .674 .674 .736 .736 .971 24, 28 .612 .612 .674 .674 .909 32, 36 .549 .549 .611 .611 .846 l mk p x b t dia. 4 mtg. holes a thd. (class-2a) max. solder pot extension r s ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 93
a-94 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors ms-e/f/r shell size a thread 8s 1/2-28unef-2a 10s 5/8-24unef-2a 10sl 5/8-24unef-2a 12s 3/4-20unef-2a 14s 7/8-20unef-2a 16s 1-20unef-2a 12 3/4-20unef-2a 14 7/8-20unef-2a shell size a thread 16 1-20unef-2a 18 1-1/8-18unef-2a 20 1-1/4-18unef-2a 22 1-3/8-18unef-2a 24 1-1/2-18unef-2a 28 1-3/4-18uns-2a 32 2-18uns-2a 36 2-1/4-16un-2a 40 2-1/2-16un-2a straight plug (continued) ? not to ms specification shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 40 b min. .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) .625 (15.88) j** max. .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) k max. .125 (3.18) .125 (3.18) .125 (3.18) .140 (3.56) .140 (3.56) .140 (3.56) .146 (3.71) .146 (3.71) .146 (3.71) .180 (4.57) .180 (4.57) .180 (4.57) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) l max. 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) l 3 max. 2.156 (54.76) 2.156 (54.76) 2.188 (55.58) 2.188 (55.58) 2.312 (58.72) 2.406 (61.11) 2.531 (64.29) 2.688 (68.28) 2.781 (70.64) 2.844 (72.24) 3.250 (82.55) 3.250 (82.55) 3.719 (94.46) 3.719 (94.46) 4.188 (106.38) 4.297 (109.14) 7.211 (183.16)? m +.031 (0.79) -.000 (0.00) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.23) .875 (22.23) .875 (22.23) p max. .426 (10.86) .520 (13.21) .614 (15.60) .614 (15.60) .739 (18.77) .664 (21.95) .614 (15.60) .739 (18.77) .864 (21.95) .989 (25.12) 1.145 (29.08) 1.270 (32.26) 1.395 (35.43) 1.614 (41.00) 1.864 (47.35) 2.051 (52.10) 2.390 (60.71) p 1 max. .844 (21.44) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 2.219 (56.36) 2.469 (62.71) 2.723 (69.16)? r .005 .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.562 (39.67) 1.750 (44.45) 1.938 (49.23) 2.188 (55.58) s .031 .875 (22.23) 1.000 (25.40) 1.000 (25.40) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.375 (34.93) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 2.000 (50.80) 2.250 (57.15) 2.500 (63.50) 2.750 (69.85) t + .010 - .005 .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39) .173 (4.39) v 1 max. 1.281 (30.94) 1.250 (31.75) 1.281 (32.54) 1.281 (32.54) 1.406 (35.71) 1.531 (38.89) 1.281 (32.54) 1.406 (35.71) 1.531 (38.89) 1.593 (40.46) 1.656 (42.06) 1.718 (43.64) 1.890 (48.01) 1.968 (49.99) 2.187 (55.55) 2.406 (61.11) 5.875 (149.22) x 1 max. .811 (20.60) .842 (21.39) .873 (22.17) .873 (22.17) .936 (23.77) .998 (25.35) .873 (22.17) .936 (23.77) .998 (25.35) 1.061 (26.95) 1.123 (28.52) 1.186 (30.12) 1.263 (32.08) 1.342 (34.09) 1.561 (39.65) 1.780 (45.21) - y max. 1.640 (41.66) 1.640 (41.66) 1.703 (43.26) 1.703 (43.26) 1.765 (44.83) 1.796 (45.62) 2.062 (52.37) 2.125 (53.98) 2.156 (54.76) 2.250 (57.15) 2.312 (58.72) 2.312 (58.72) 2.531 (64.29) 2.531 (64.29) 2.750 (69.85) 2.875 (73.02) 5.690 (144.53) ms3108e / ms3108r ca3108e / ca3108r ms3108r 90 angle plugs with o-ring seal (less cable clamp) and the ms3108e 90 angle plugs (less o-ring seal with cable clamp) are used where there is limited space and where wires must be brought at abrupt angles. these plugs will mate with 3100, 3101 and 3102 receptacles. performance specifications - page a-74 contact, ceiling plugs, assembly tools - page a-95 contact arrangements - page a-75 C a-79 90 angle plug a thread shell box mounting 90 angle size receptacle plug 8s 1/2-28unef-2a 1/2-28UNEF-2B 10s 5/8-24unef-2a 5/8-24unef-2b 10sl 5/8-24unef-2a 5/8-24unef-2b 12s 3/4-20unef-2a 3/4-20unef-2b 14s 7/8-20unef-2a 7/8-20unef-2b 16s 1-20unef-2a 1-20unef-2b 12 3/4-20unef-2a 3/4-20unef-2b 14 7/8-20unef-2a 7/8-20unef-2b a thread shell box mounting 90 angle size receptacle plug 16 1-20unef-2a 1-20unef-2b 18 1-1/8-18unef-2a 1-1/8-18unef-2b 20 1-1/4-18unef-2a 1-1/4-18unef-2b 22 1-3/8-18unef-2a 1-3/8-18unef-2b 24 1-1/2-18unef-2a 1-1/2-18unef-2b 28 1-3/4-18uns-2a 1-3/4-18uns-2b 32 2-18uns-2a 2-18uns-2b 36 2-1/4-16un-2a 2-1/4-16un-2b 40 2-1/2-16un-2a 2-1/2-16un-2b j** a thd. (class-2b) end of thread (ms3108r) thread for attachment of m85049/41 (ms3057) cable clamp y 3 l 1 v 1 p 1 x performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 94
a-95 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors ms-e/f/r components endbell ferrule grommet pin contacts insulator coupling nut barrel o ring cable clamp ms3106r ca3106r straight plug note: class f is not applicable to ms3108 shell style. * class e inactive for new design. use class f or r. ms3106f ca06r straight plug ms3106e* ca3106e straight plug ms3108e ca3108e 90 angle plug ms3108r ca3108r 90 angle plug ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 95
a-96 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors ms-e/f/r shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 l max. 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.968 (49.99) 1.968 (49.99) 1.968 (49.99) 1.968 (49.99) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) r .005 (0.13) .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.562 (39.67) 1.750 (44.45) 1.938 (49.23) s max. .906 (23.01) 1.031 (26.19) 1.031 (26.19) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.406 (35.71) 1.531 (38.89) 1.656 (42.06) 1.781 (45.24) 2.031 (51.59) 2.281 (57.94) 2.531 (64.29) r +.010 (+0.25) -.005 (-.031) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39) a thread 1/2-28unef-2a 5/8-24nef-2a 5/8-24nef-2a 3/4-20unef-2a 7/8-20unef-2a 1-20unef-2a 3/4-20unef-2a 3/4-20unef-2a 1-20unef-2a 1-1/8-180nef-2a 1-1/4-18nef-2a 1-3/8-18nef-2a 1-1/2-18nef-2a 1-3/4-18ns-2a 2-18ns-2a 2-1/4-16un-2a ms 25183 - 18 - 10 p ms 3103 - 18 - 10 p ca 3100 er 18 - 10 p prefix shell style class shell size contact arrangements contact type prefix ca - itt cannon prefix indicating special application or variation of ms shell style 3100 - wall mounting receptacle (ms3103) 3106 - straight plug (ms325183) 3108 - 90 angle plug class er - resilient insulator, nylon potting cup and thread attachment ring no class designator for ms types. how to order wall mounting receptacle shell style coupling thread diameter figured in sixteenths of an inch contact arrangements see pages a-85 C a-89 contact type p - pin s - socket ms type potting connectors are available with nylon cups. 00 and 06 shell styles with plastic cups and resilient insulators meet the requirements of ms3103 and ms25183. also available is the 08 plug with resilient insulator and 90 angle nylon potting cup. itt cannon provides for a 1/4" clearance for potting on all contact sizes. the ca3100er receptacle (ms3103) is supplied with a resilient insulator and nylon potting cup with a threaded attachment ring. this receptacle mates with 3106 and 3108 plugs. performance specifications - page xxx contact, ceiling plugs, assembly tools - page xxx contact arrangements - page xxx ms3103 nylon potting cup threaded attachment ring ca3100er s r polarizing boss t dia. 4 mtg. holes a thd. l performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 96
a-97 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors ms-e/f/r straight plug 90 angle plug ms25183 nylon potting cup rubber gasket nylon potting cup rubber gasket ca3108er ca3106er the ca3106er plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings, and a rubber gasket under the coupling nut. this plug mates with 3100, 3101 and 3102 recaptacles. the ca3108er is supplied with resilient insulator, 90o nylon potting cup and threaded attachment ring with a rubber gasket under the coupling nut. this plug mates with 3100, 3101 and 3102 receptacles. ca3106er shell j l p a size max. max. max. thread 8s .536 (13.61) 1.562 (39.67) .844 (21.44) 1/2-28UNEF-2B 10s .536 (13.61) 1.562 (39.67) .969 (21.44) 5/8-24unef-2b 10sl .536 (13.61) 1.562 (39.67) .969 (21.44) 5/8-24unef-2b 12s .536 (13.61) 1.562 (39.67) 1.062 (21.44) 3/4-20unef-2b 14s .536 (13.61) 1.562 (39.67) 1.156 (21.44) 7/8-20unef-2b 16s .536 (13.61) 1.562 (39.67) 1.250 (21.44) 1-20unef-2b 12 .724 (18.39) 2.000 (50.80) 1.062 (26.97) 3/4-20unef-2b 14 .724 (18.39) 2.000 (50.80) 1.156 (29.36) 7/8-20unef-2b 16 .724 (18.39) 2.000 (50.80) 1.250 (31.75) 1-20unef-2b 18 .724 (18.39) 2.000 (50.80) 1.344 (34.14) 1-1/8-18unef-2b 20 .724 (18.39) 2.125 (53.98) 1.469 (37.31) 1-1/4-18unef-2b 22 .724 (18.39) 2.125 (53.98) 1.594 (40.49) 1-3/8-18unef-2b 24 .724 (18.39) 2.125 (53.98) 1.719 (43.66) 1-1/2-18unef-2b 28 .724 (18.39) 2.125 (53.98) 1.969 (50.01) 1-3/4-18uns-2b 32 .724 (18.39) 2.180 (55.37) 1.219 (30.96) 2-18uns-2b 36 .724 (18.39) 2.180 (55.37) 2.469 (62.71) 2-1/4-16un-2b 40 .724 (18.39) 2.180 (55.37) 2.723 (69.16) 2-1/2-16un-2b ca3108er l max. for arr. for arr. w/#16 w/#8 b d p a max. max. contacts contacts max. thread - - - - - - - - - - - - .563(13.61) 1.040(26.42) 1.463(37.16) - 969(24.61) 5/8-24unef-2b .563(13.61) 1.040(26.42) 1.600(40.64) - 1.062(26.97) 3/4-24unef-2b .563(13.61) 1.040(26.42) 1.600(40.64) 2.300(58.42) 1.156(29.36) 7/8-20unef-2b .563(13.61) 1.290(32.77) 1.600(40.64) 2.550(64.77) 1.250(31.75) 1-20unef-2b .724(18.39) 1.040(26.42) 1.910(48.51) - 1.062(26.97) 3/4-20unef-2b .724(18.39) 1.040(26.42) 1.910(48.51) 2.610(66.29) 1.156(29.36) 7/8-20unef-2b .724(18.39) 1.290(32.77) 1.910(48.51) 2.850(72.39) 1.250(31.75) 1-20unef-2b .724(18.39) 1.290(32.77) 2.100(53.34) 2.850(72.39) 1.344(34.14) 1-1/8-18unef-2b .724(18.39) 1.540(39.12) 2.100(53.34) 2.850(72.39) 1.469(37.31) 1-1/4-18unef-2b .724(18.39) 1.540(39.12) 2.100(53.34) 2.850(72.39) 1.594(40.49) 1-3/8-18unef-2b .724(18.39) 1.790(45.47) 2.281(57.94) 2.985(75.82) 1.719(43.66) 1-1/2-18unef-2b .724(18.39) 2.040(51.82) 2.485(63.12) 2.985(75.82) 1.969(50.01) 1-3/4-18uns-2b .724(18.39) 2.290(58.17) 2.485(63.12) 2.985(75.82) 1.219(30.96) 2-18uns-2b .724(18.39) 2.540(64.52) 2.485(63.12) 2.985(75.82) 2.469(62.71) 2-1/4-16un-2b p a thd. gasket length of engagement metal potting ring j to e n d of contact 1/4" l p dia. polarizing groove a thd. b l d metal potting ring performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 97
a-98 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors ms straight plug with shrink boot adapter ca3106e-dn ca3106e-dn is a straight plug with endbell for shrink boot adapters. crimp and solder versions are avail- able (please indicate ...f80 or ...f183). ca3106-dn mate with 3100, 3101 and 3102 shell styles. order reference a b c d e f l p pin insert* thread min. max. 0.2 0,2 0,5 max. max. ca3106e10sl-**-p-dn 5/8-24nef-2b 7,7 13,2 15,5 17,0 11,7 11,7 50,0 ca3106e12s-**-p-dn 3/4-20unef-2b 7,9 13,2 15,5 17,8 11,8 58,8 25,6 ca3106e14s-**-p-dn 7/8-20unef-2b 10,6 17,0 19,1 19,1 11,7 50,0 28,6 ca3106e16s-**-p-dn 1-20unef-2b 13,5 21,9 23,9 23,9 11,5 50,0 31,8 ca3106e12-**-p-dn 3/4-20unef-2b 7,9 13,2 15,5 17,8 11,7 50,0 25,6 ca3106e14-**-p-dn 7/8-20unef-2b 10,6 17,0 19,1 20,1 11,7 60,0 28,6 ca3106e16-**-p-dn 1-20unef-2b 13,5 21,9 23,9 23,5 11,5 60,0 31,8 ca3106e18-**-p-dn 1-1/8-18nef-2b 14,6 21,9 23,9 26,5 12,7 60,0 34,1 ca3106e20-**-p-dn 1-1/4-18nef-2b 18,5 26,6 29,6 30,2 12,7 65,0 37,3 ca3106e22-**-p-dn 1-3/8-18nef-2b 20,8 26,2 29,6 33,6 12,7 65,0 40,5 ca3106e24-**-p-dn 1-1/2-16nef-2b 24,6 34,5 37,8 36,1 12,7 65,0 43,8 ca3106e28-**-p-dn 1-3/4-18ns-2b 27,0 34,5 37,8 41,4 12,7 65,0 50,0 ca3106e32-**-p-dn 2-18ns-2b 33,3 43,6 47,8 48,6 15,2 70,0 56,3 ca3106e36-**-p-dn 2-1/4-16un-2b 38,5 43,6 47,8 54,8 15,2 80,0 62,7 *for socket inserts substitute s for p **add contact arrangement number (see pages a-85 ? a-89) ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 98
a-99 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 bulkhead receptacles bfr/tbf bfr 14s - s p * 1 tbf 20 - 15 ps * prefix shell size contact arrangement contact type alternate position mounting (bfr only) prefix bfr - bulkhead fittings tbf - thru bulkhead fittings shell size coupling thread diameter figured in sixteenths of an inch. contact arrangements see pages a-85 ? a-89 how to order thru-bulkhead receptacle contact type p - pin; s - socket; ps - pin and socket (tbf only) alternate position (consult factory for available alternate positions.) mounting -1 obligatory code, bfr only tbf and bfr pressurized bulkhead receptacles mate with standard ms type plugs (3106 and 3108) if contact arrangements correspond. both the bfr and tbf have resilient insulators. the tbf (thru bulkhead fitting) version has a double faced construction allowing mating from both ends. an o-ring is supplied as standard on both the bfr and tbf. contacts are silver plated copper or brass alloy. shells are aluminum alloy. tbf thru-bulkhead fittings have pressurized resilient insulators. special double- faced pin and socket contact construction permits cable components to be wired and tested in the shop and then to be plugged into the mounted tbf plug to complete the installation. the tbf mates with 3106, 3107 and 3108 plugs. tbf - resilient insulator pin insert ends socket insert ends a-85 ? a-89 ega p - stnemegnarra tcatnoc a-105 egap - sloot ylbmessa ,sgulp gnilaes ,stcatnoc a-84 egap - snoitacificeps ecnamrofrep shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 40 k max. .125 (3.18) .125 (3.18) .125 (3.18) .140 (3.56) .140 (3.56) .140 (3.56) .146 ( 3.71) .146 ( 3.71) .146 ( 3.71) .180 (4.57) .180 (4.57) .180 (4.57) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) l max. 1.482 (37.64) 1.482 (37.64) 1.482 (37.64) 1.482 (37.64) 1.482 (37.64) 1.482 (37.64) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) 2.030 (51.56) m +.031 (0.79) -.000 (0.00) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.22) .812 (20.62) .875 (22.22) r .005 (0.13) .594 (15.09) .179 (18.26) .179 (18.26) .812 (20.62) .906 (23.01) .968 (24.59) .812 (20.62) .906 (23.01) .968 (24.59) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.562 (39.67) 1.750 (44.45) 1.938 (49.23) 2.188 (55.58) s .031 (0.79) .875 (22.22) 1.000 (25.40) 1.000 (25.40) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.094 (27.79) 1.188 (30.18) 1.281 (32.54) 1.375 (34.92) 1.500 (38.10) 1.625 (34.28) 1.750 (44.45) 2.000 (50.80) 2.250 (57.15) 2.500 (63.50) 2.750 (69.85) t +.010 (0.25) -.005 (0.13) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39) .173 (4.39) v max. .325 (8.26) .325 (8.26) .325 (8.26) .325 (8.26) .325 (8.26) .325 (8.26) .445 (11.30) .445 (11.30) .445 (11.30) .445 (11.30) .445 (11.30) .445 (11.30) .383 (9.73) .383 (9.73) .320 (8.13) .383 (9.73) .383 (9.73) a thread 1/2-28unef-2a 5/8-24unef-2a 5/8-24unef-2a 3/4-20unef-2a 7/8-20unef-2a 1-20unef-2a 3/4-20unef-2a 7/8-20unef-2a 1-20unef-2a 1-1/8-18unef-2a 1-1/4-18unef-2a 1-3/8-18unef-2a 1-1/2-18unef-2a 1-3/4-18uns-2a 2-18uns-2a 2-1/4-16un-2a polarizing boss polarizing boss s typ. r typ. panel thickness a thd. v l k socket side m pin side t dia. 4 mtg. holes ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 99
a-100 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 bulkhead receptacles bfr/tbf pressurized bulkhead receptacle mounting dimensions bfr pressurized bulkhead receptacles withstand the air leakage requirements of mil-c-5015 not to exceed 1 cu. in. of air per hour when subjected to a pressure differential of 30 psi at -55c. insulators are resilient material bonded to aluminum shell. both pin and socket assemblies are available. the bfr will mate with standard ms type 3106 and 3108 plugs. type 1 shell insulator lock nut o ring position pin mounting part no. example standard polychloroprene hex with 6 wire holes neoprene standard figure 1 or 2 bfr-14s-sp-1 bfr shell size 8s 10s 10sl 12s 14s 16s 12 14 16 18 20 22 24 28 32 36 c max. .853 (21.67) .853 (21.67) .853 (21.67) .853 (21.67) .853 (21.67) .853 (21.67) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) 1.244 (31.60) g max. .895 (22.73) 1.015 (25.78) 1.015 (25.78) 1.077 (27.36) 1.203 (30.56) 1.327 (33.71) 1.077 (27.36) 1.203 (30.56) 1.327 (33.71) 1.453 (36.91) 1.577 (40.06) 1.577 (40.06) 1.827 (48.41) 1.953 (49.61) 2.203 (55.96) 2.577 (65.46) h max. 1.077 (27.36) 1.203 (30.56) 1.203 (30.56) 1.327 (33.71) 1.453 (36.91) 1.577 (40.06) 1.327 (33.71) 1.453 (36.91) 1.577 (40.06) 1.703 (43.26) 1.827 (46.41) 1.953 (49.61) 2.077 (52.76) 2.327 (59.11) 2.577 (65.45) 2.827 (71.81) l max. 1.087 (27.61) 1.087 (27.61) 1.087 (27.61) 1.087 (27.61) 1.087 (27.61) 1.087 (27.61) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) 1.525 (38.74) m max. .702 (17.83) .822 (20.88) .822 (20.88) .955 (24.26) 1.072 (27.23) 1.265 (32.13) .955 (24.26) 1.072 (27.23) 1.265 (32.13) 1.395 (35.43) 1.515 (38.48) 1.635 (41.53) 1.765 (44.83) 2.015 (51.18) 2.205 (56.01) 2.455 (62.36) n max. .820 (20.83) .960 (24.38) .960 (24.38) 1.110 (28.19) 1.250 (31.75) 1.460 (37.08) 1.110 (28.19) 1.250 (31.75) 1.460 (37.08) 1.610 (40.89) 1.750 (44.45) 1.900 (48.26) 2.030 (51.56) 2.330 (59.18) 2.550 (64.77) 2.840 (72.14) #16 .140 (3.56) .140 (3.56) .140 (3.56) .140 (3.56) .140 (3.56) .140 (3.56) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) #12 - - - - - - .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) .062 (1.57) t max. solder pot ext. #8 - - - - - - - .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) #4 - - - - - - - - .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) #0 - - - - - - - - - - .359 (9.12) .359 (9.12) .359 (9.12) .359 (9.12) .359 (9.12) .359 (9.12) v max. .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .375 (9.52) .312 (7.92) shell size a thread 8s 1/2-28unef-2a 10s 5/8-24unef-2a 10sl 5/8-24unef-2a 12s 3/4-20unef-2a 14s 7/8-20unef-2a 16s 1-20unef-2a 12 3/4-20unef-2a 14 7/8-20unef-2a shell size a thread 16 1-20unef-2a 18 1-1/8-18unef-2a 20 1-1/4-18unef-2a 22 1-3/8-18unef-2a 24 1-1/2-18unef-2a 28 1-3/4-18uns-2a 32 2-18uns-2a 36 2-1/4-16un-2a ae f .005 +.015 (0.38) .005 shell size (0.13) -.000 (0.00) (0.13) 8s .323 (8.20) .500 (12.70) .373 (9.47) 10s, 10sl .385 (9.78) .625 (15.88) .435 (11.05) 12s, 12 .448 (11.38) .750 (19.05) .498 (12.65) 14s, 14 .510 (12.95) .875 (22.22) .560 (14.22) 16s, 16 .573 (14.55) 1.000 (25.40) .623 (15.82) 18 .635 (16.13) 1.125 (28.58) .685 (17.40) ae f .005 +.015 (0.38) .005 shell size (0.13) -.000 (0.00) (0.13) 20 .698 (17.73) 1.250 (31.75) .748 (19.00) 22 .760 (19.30) 1.375 (34.92) .810 (20.57) 24 .823 (20.90) 1.500 (38.10) .873 (22.17) 28 .948 (24.08) 1.750 (44.45) .998 (25.35) 32 1.073 (27.25) 2.000 (50.80) 1.123 (28.52) 36 1.198 (30.43) 2.250 (57.15) 1.248 (31.70) performance specifications - page xx contacts, sealing plugs, assembly tool - page xx contact arrangements - page xx a cross hex n m l c t g h a thd. v panel thickness standard position pin is 3/32" dia. e a e f .102 (2.59) .097 (2.46) dia .102 (2.59) .097 (2.46) dia fig. 1 fig. 2 performance specifications - page a-84 contact, ceiling plugs, assembly tools - page a-105 contact arrangements - page a-85 ? a-89 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 100
a-101 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors panel cutouts flange dimensions and mounting holes for 5015 type ms receptacles. mounting hole diameters do not apply to ms5015 class kt & ks connectors. dim tol .005 .031 .005 shell size r s o t 8s .594 .875 .562 .120 10s & 10sl .719 1.000 .688 .120 12 & 12s .812 1.094 .812 .120 14 & 14s .906 1.188 .938 .120 16 & 16s .969 1.281 1.062 .120 18 1.062 1.375 1.188 .120 20 1.156 1.500 1.312 .120 22 1.250 1.625 1.438 .120 24 1.375 1.750 1.562 .147 28 1.562 2.000 1.812 .147 32 1.750 2.250 2.062 .173 36 1.938 2.500 2.312 .173 40 2.188 2.750 2.562 .173 s r t o ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 101
a-102 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors accessories plug metal protective caps plug metal protective caps 03571ac 24052sm ca19741 for 06 and 08 style plugs these externally threaded metal dust caps are used to protect the ms3106 and ms3108 plugs. material is aluminum alloy. they are furnished with sash chain or less sash chain. 9022ac 34052sm ca2322 for 00, 01 and 02 style receptacles these internally threaded metal dust caps are used to protect the ms3100, ms3101 and ms3102 receptacles. material is aluminum alloy. they are furnished with sash chain or less sash chain. part number olive drab chromate over cadmium finish with sash chain olive drab chromate over d c hsinif muimdaceb llits yam htiw hsinif dezidona kcalb sash chain superceded purchased by without sash chain fits b dia. e dia. a ms itt cannon ms number (ref) ittc part number ittc part number shell size max. max. max. max. thread ms25042-8da ca17530-8000 ms25042-8d ca17530-5100 ca19741-8 8s .656 (16.66) .562 (14.27) 4.500 (114.30) .166 (4.22) 1/2-28unef-2a ms25042-10da ca17530-8001 ms25042-10d ca17530-5101 ca19741-10 10s, 10sl .656 (16.66) .687 (17.45) 4.500 (114.30) .166 (4.22) 5/8-24unef-2 a ms25042-12da ca17530-8002 ms25042-12d ca17530-5102 ca19741-12 12, 12s .844 (21.44) .812 (20.62) 5.500 (139.70) .166 (4.22) 3/4-20unef-2a ms25042-14da ca17530-8003 ms25042-14d ca17530-5103 ca19741-14 14, 14s .844 (21.44) .937 (23.80) 5.500 (139.70) .166 (4.22) 7/8-20unef-2a ms25042-16da ca17530-8004 ms25042-16d ca17530-5104 ca19741-16 16, 16s .844 (21.44) 1.062 (26.97) 5.500 (139.70) .166 (4.22) 1-20unef-2a ms25042-18da ca17530-8005 ms25042-18d ca17530-5105 ca19741-18 18 .844 (21.44) 1.187 (30.15) 5.500 (139.70) .166 (4.22) 1-1/8-18unef-2a ms25042-20da ca17530-8006 ms25042-20d ca17530-5106 ca19741-20 20 .844 (21.44) 1.312 (33.32) 5.500 (139.70) .197 (5.00) 1-1/4-18unef-2a ms25042-22da ca17530-8007 ms25042-22d ca17530-5107 ca19741-22 22 .844 (21.44) 1.437 (36.50) 5.500 (139.70) .197 (5.00) 1-3/8-18unef-2a ms25042-24da ca17530-8008 ms25042-24d ca17530-5108 ca19741-24 24 .844 (21.44) 1.562 (39.67) 6.000 (152.40) .197 (5.00) 1-1/2-18unef-2a ms25042-28da ca17530-8009 ms25042-28d ca17530-5109 ca19741-28 28 .844 (21.44) 1.812 (46.02) 8.250 (209.55) .197 (5.00) 1-3/4-18unef-2a ms25042-32da ca17530-8010 ms25042-32d ca17530-5110 ca19741-32 32 .844 (21.44) 2.062 (52.37) 8.250 (209.55) .228 (5.79) 2-18unef-2a ms25042-36da ca17530-8011 ms25042-36d ca17530-5111 ca19741-36 36 .844 (21.44) 2.312 (58.72) 8.250 (209.55) .228 (5.79) 2-1/4-16un-2a ms25042-40da ca17530-8012 ms25042-40d ca17530-5112 ca19741-40 40 .844 (21.44) 2.562 (65.07) 8.250 (209.55) .228 (5.79) 2-1/2-16un-2a ms25042-44da ca17530-8013 ms25042-44d ca17530-5113 ca19741-44 44 .844 (21.44) 2.812 (71.42) 8.250 (209.55) .228 (5.79) 2-3/4-16un-2a ms25042-48da ca17530-8014 ms25042-48d ca17530-5114 ca19741-48 48 .844 (21.44) 3.062 (77.77) 8.250 (209.55) .228 (5.79) 3-16un-2a part number olive drab chromate over cadmium finish with sash chain olive drab chromate over d c hsinif muimdaceb llits yam htiw hsinif dezidona kcalb sash chain superceded purchased by without sash chain fits b dia. e dia. a ms itt cannon ms number (ref) ittc part number ittc part number shell size max. max. max. max. thread ms25043-8da ca2209-8000 ms25043-8d ca2209-5100 ca2322-1 8s .469 (11.91) .688 (17.48) 4.500 (114.30) .150 (3.81) 1/2-28UNEF-2B ms25043-10da ca2209-8001 ms25043-10d ca2209-5101 ca2322-2 10s, 10sl .469 (11.91) .815 (20.70) 4.500 (114.30) .150 (3.81) 5/8-24unef-2b ms25043-12da ca2209-8002 ms25043-12d ca2209-5102 ca2322-3 12, 12s .469 (11.91) 1.000 (25.40) 5.500 (139.70) .150 (3.81) 3/4-20unef-2b ms25043-14da ca2209-8003 ms25043-14d ca2209-5103 ca2322-4 14, 14s .469 (11.91) 1.125 (28.58) 5.500 (139.70) .150 (3.81) 7/8-20unef-2b ms25043-16da ca2209-8004 ms25043-16d ca2209-5104 ca2322-5 16, 16s .469 (11.91) 1.188 (30.18) 5.500 (139.70) .150 (3.81) 1-20unef-2b ms25043-18da ca2209-8005 ms25043-18d ca2209-5105 ca2322-6 18 .469 (11.91) 1.344 (34.14) 5.500 (139.70) .150 (3.81) 1-1/8-18unef-2b ms25043-20da ca2209-8006 ms25043-20d ca2209-5106 ca2322-7 20 .469 (11.91) 1.469 (37.31) 5.500 (139.70) .150 (3.81) 1-1/4-18unef-2b ms25043-22da ca2209-8007 ms25043-22d ca2209-5107 ca2322-8 22 .469 (11.91) 1.594 (40.49) 5.500 (139.70) .150 (3.81) 1-3/8-18unef-2b ms25043-24da ca2209-8008 ms25043-24d ca2209-5108 ca2322-9 24 .469 (11.91) 1.719 (43.66) 6.000 (152.40) .181 (4.60) 1-1/2-18unef-2b ms25043-28da ca2209-8009 ms25043-28d ca2209-5109 ca2322-10 28 .531 (13.49) 1.969 (50.01) 8.250 (209.55) .181 (4.60) 1-3/4-18uns-2b ms25043-32da ca2209-8010 ms25043-32d ca2209-5110 ca2322-11 32 .531 (13.49) 2.219 (56.36) 8.250 (209.55) .197 (5.00) 2-18uns-2b ms25043-36da ca2209-8011 ms25043-36d ca2209-5111 ca2322-12 36 .531 (13.49) 2.469 (62.71) 8.250 (209.55) .197 (5.00) 2-1/4-16un-2b ms25043-40da ca2209-8012 ms25043-40d ca2209-5112 ca2322-13 40 .531 (13.49) 2.719 (69.06) 8.250 (209.55) .197 (5.00) 2-1/2-16un-2b ms25043-44da ca2209-8013 ms25043-44d ca2209-5113 ca2322-14 44 .531 (13.49) 2.969 (75.41) 8.250 (209.55) .197 (5.00) 2-3/4-16un-2b ms25043-48da ca2209-8014 ms25043-48d ca2209-5114 ca2322-15 48 .531 (13.49) 3.188 (80.98) 8.250 (209.55) .197 (5.00) 3-16un-2b c dia. d dia. e b a thd. .250 min. perf. thd. c dia. d dia. b e a thd. gasket ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 102
a-103 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors accessories cable clamp telescoping bushing m85049-41 with or without bushing m85049-41 cable clamp is made for plugs and receptacles that have an endbell with external conduit threads. the double clamping action provides a balanced, positive hold on the wires and greatly reduces moisture transmission. provision is made for safety wiring. this clamp is supplied without bushing; to order bushing, add ?with bushing? after part number. ms3420/ ms39056(ref.) ca18220 telescoping gland bushing (used with m85049/41 cable clamp) keep dirt, oil and moisture out of endbell. taping or wrapping wires is eliminated since bushing protects wires going through clamp. combinations of bushings may be used to decrease cable entry diameter to improve sealing. *to order cable clamp with bushing, add ?with bushing? after part number. part number* m85049/41-3a m85049/41-4a m85049/41-6a m85049/41-8a m85049/41-10a m85049/41-12a m85049/41-16a m85049/41-20a m85049/41-24a m85049/41-28a m85049/41-32a m85049/41-40a superceded part number ms3057-3a ms3057-4a ms3057-6a ms3057-8a ms3057-10a ms3057-12a ms3057-16a ms3057-20a ms3057-24a ms3057-28a ms3057-32a ms3057-40a fits shell size 8s-10s 10sl, 12s, 12 14s, 14 16s, 16 18 20, 22 24, 28 32 36 40 44 48 accommodates ms bushings ms3420-3 ms3420-4 ms3420-6 ms3420-8 ms3420-10 ms3420-12 ms3420-16,12 ms3420-20,16 ms3420-24,20 ms3420-24,20 ms3420-32,28,24 ms3420-40,32,28 e min. .102 (2.59) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .468 (11.89) .664 (16.87) .694 (17.63) .911 (23.14) - - e max. .250 (6.35) .312 (7.92) .438 (11.13) .562 (14.27) .625 (15.88) .750 (19.05) .938 (23.83) 1.250 (31.75) 1.375 (34.92) 1.625 (41.28) 1.875 (47.62) 2.375 (60.32) l .031 (0.79) .812 (20.62) .812 (20.62) .875 (22.22) .938 (23.83) .938 (23.83) .938 (23.83) 1.031 (26.19) 1.094 (27.79) 1.156 (29.36) 1.688 (42.88) 1.750 (44.45) 1.750 (44.45) p 0.31 (0.79) .688 (17.48) .812 (20.62) .969 (24.61) 1.094 (27.79) 1.188 (30.18) 1.375 (34.92) 1.656 (42.06) 2.031 (51.59) 2.219 (56.36) 2.500 (63.50) 2.781 (70.64) 3.281 (83.34) r 0.31 (0.79) .812 (20.62) .875 (22.22) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.496 (37.31) 1.688 (42.88) 2.031 (51.59) 2.281 (57.94) 2.688 (68.28) 2.938 (74.63) 3.500 (88.90) a thread 1/2-28UNEF-2B 5/8-24unef-2b 3/4-20unef-2b 7/8-20unef-2b 1-20unef-2b 1-3/16-18unef-2b 1-7/16-18unef-2b 1-3/4-18uns-2b 2-18uns-2b 2-1/4-16un-2b 2-1/2-16un-2b 3-16un-2b ms part number ms3420-3 ms3420-4 ms3420-6 ms3420-8 ms3420-10 ms3420-12 ms3420-16 ms3420-20 ms3420-24 ms3420-28 ms3420-32 ms3420-40 superceded ms part number ms39056-1 ms39056-2 ms39056-3 ms39056-4 ms39056-5 ms39056-6 ms39056-7 ms39056-8 ms39056-9 ms39056-10 ms39056-11 ms39056-12 itt cannon part number ca18220-3 ca18220-4 ca18220-6 ca18220-8 ca18220-10 ca18220-12 ca18220-16 ca18220-20 ca18220-24 ca18220-28 ca18220-32 ca18220-40 fits shell size 8s-10s 10sl, 12s, 12 14s, 14 16s, 16 18 20, 22 24, 28 32 36 40 44 48 c 0.16 (0.41) .379 (9.63) .505 (12.83) .619 (15.72) .744 (18.90) .869 (22.07) 1.064 (27.03) 1.314 (33.38) 1.596 (40.54) 1.847 (46.91) 2.085 (52.96) 2.335 (59.31) 2.835 (72.01) l 0.31 (0.79) 2.875 (73.02) 2.750 (69.85) 2.625 (66.68) 2.500 (63.50) 2.375 (60.32) 2.250 (57.15) 2.125 (53.98) 2.000 (50.80) 1.875 (47.62) 1.750 (44.45) 1.625 (41.28) 1.500 (38.10) r 0.16 (0.41) .130 (3.30) .200 (5.59) .312 (7.92) .437 (11.10) .562 (14.27) .625 (15.88) .750 (19.05) .937 (23.80) 1.250 (31.75) 1.375 (34.92) 1.624 (41.25) 1.874 (47.60) telescoping bushing with m85049/41 cable clamp r c l r l p e .063 a thd. 2 places safety wires holes ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 103
a-104 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors accessories plastic protective caps protective dust caps are designed to cover the coupling and conduit ends of ms connectors where there is a possibility of foreign matter accumulating on the interior of the connector or of damage to the threaded parts. material is red polyethylene. plastic dust caps can be reused, but are not intended to replace the standard aluminum dust caps shown in preceding pages. ms3106/ms3108 ms3100f,r ms3102f,r ms-f (only) f,r part coupling solder coupling solder solder coupling solder number end pot end end pot end pot end end pot end )19.11( 964. s8 s8 000-8540-520 025-0459-000 8s 8s, 10s 8s 8s, 10s 025-0460-000 10s, 10sl 10sl, 12s, 12 10s, 10sl 10sl, 12s, 12 025-0462-000 12s, 12 14s, 14 12s, 12 14s, 14 025-0463-000 14s, 14 16s, 16 14s, 14 16s, 16 81 000-6640-520 02 000-7640-520 22 02 02000-8640-520 42 22 22000-9640-520 82 000-0740-520 23 000-1740-520 63 000-2740-520 04 000-3740-520 44 000-4740-520 84 000-5740-520 025-0477-000 10s, 10sl 025-0478-000 12s, 12 025-0479-000 14s, 14 025-0480-000 16s, 16 025-0484-000 18 025-0486-000 22 025-0487-000 24 025-0488-000 28 025-0489-000 32 025-0490-000 36 025-0491-000 40 025-0492-000 44 025-0493-000 48 81 84 61 ,s61 8161 ,s61000-8940-520 22 ,0222 63 22 ,02 000-9940-520 82 ,42 04 42 ,42 000-0050-520 23 44 82 23 82000-1050-520 63 23 23 63 23000-2050-520 04 82 ,42 63 04 63000-3050-520 44 22 ,02 04 44 04000-4050-520 84 81 84 84000-5050-520 02 81 81000-7050-520 42 42000-0150-520 025-0511-000 44 48 44 s8 000-8060-520 21 ,s21 ,ls01 000-9060-520 41 ,s41 000-0160-520 61 ,s61 000-1160-520 82 000-2160-520 23 000-3160-520 63 000-4160-520 a max. .673 .734 .848 .973 1.098 1.209 1.396 1.500 1.625 1.870 2.120 2.370 2.501 2.872 3.122 .802 .911 1.036 1.161 1.290 1.540 1.665 1.907 2.157 2.412 2.672 2.922 3.172 1.240 1.427 1.677 1.985 2.245 2.495 2.742 3.257 1.365 1.740 3.007 .643 .829 .954 1.079 1.839 2.089 2.376 b max. .440 .440 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .491 .571 .571 .571 .576 .576 .576 .576 .576 .576 .576 .576 .576 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .700 .440 .700 .700 .700 .700 .700 .700 c max. .430 .490 .600 .730 .850 .950 1.150 1.240 1.360 1.610 1.860 2.110 2.310 2.590 2.840 .550 .669 .794 .919 1.028 1.278 1.403 1.645 1.895 2.140 2.390 2.640 2.890 .990 1.117 1.420 1.730 1.980 2.230 2.480 2.980 1.110 1.490 2.730 .400 .580 .710 .830 1.570 1.820 2.010 d max. .486 .546 .656 .786 .908 1.016 1.216 1.306 1.426 1.676 1.926 2.176 2.380 2.660 2.910 .616 .725 .850 .975 1.094 1.344 1.469 1.711 1.961 2.216 2.466 2.716 2.966 1.056 1.183 1.486 1.796 2.046 2.296 2.546 3.046 1.176 1.556 2.796 .456 .636 .766 .886 1.626 1.876 2.066 e max. .583 .644 .758 .883 1.008 1.119 1.308 1.405 1.530 1.775 2.025 2.275 2.491 2.772 30.22 .712 .821 .946 1.071 1.195 1.445 1.570 1.812 2.062 2.317 2.572 2.822 3.072 1.150 1.337 1.587 1.895 2.155 2.400 2.652 3.157 1.275 1.650 2.907 .553 .739 .864 .989 1.744 1.994 2.231 wt. lb. .0012 .0014 .0022 .0028 .0033 .0042 .0054 .0060 .0067 .0087 .0103 .0141 .0164 .0186 .0222 .0017 .0022 .0027 .0033 .0044 .0058 .0066 .0084 .0102 .0132 .0163 .0186 .0213 .0044 .0055 .0072 .0095 .0114 .0134 .0186 .0233 .0050 .0077 .0220 .0011 .0021 .0028 .0032 .0088 .0100 .0132 dimensions 025-xxxx-000 a b cd e .06 .13 ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 104
a-105 www.ittcannon.com dimensions shown in inches (mm) specifications and dimensions subject to change circular a mil-dtl-5015 connectors accessories f80 assembly instructions itt cannon provides a complete line of crimp insertion and extraction tooling to be used with ca-f80 contacts as follows. contact hand crimp power crimp crimp size tool* locator tool* head locator gauge 16 m-2252/1-01 th-70-1 cbt-530 12 m-2252/1-01 tp567 cbt-600/600b cch-12-7 cchp-12-2 - 8 - - cbt-600/600b cch-8-1 cchp-8-1 cch-8-1 4 - - cbt-600/600b cch-4-1 cchp-4-1 cch-4-1 0 - - cbt-600b cch-0-1 cchp-0-9 cch-0 *the m-22520/1-01 is the mil standard crimp tool for #12 thru #20 contacts and when used with crimp #12, 16 and 20 contacts for the ca-f80. **the cbt-600 is recommended for crimping of #4 thru #12 contacts. the cbt-600b for #0 thru #8. the appropriate locators and crimp heads are available as shown above. crimp tool crimping contacts 1. check the crimp tool to be sure that the proper crimp head locator is used. 2. cycle to tool to be sure the indentors are open. 3. place the contact, mating end first, into the tool. 4. insert the stripped wire into the hollow end of the contact. be sure the wire is inserted as far as it will go. 5. close the tool completely to crimp. unless the tool is closed completely, the tool will not release the contact. 6. remove the crimped contact from the tool. check the inspection hole to verify that the wire is fully inserted. insertion/extraction tools insertion and extraction tools used for these connectors are available for contact sizes 16 thru 0 as shown. contact insertion extraction handle size tools tools color 16 cit-16 cet-16-4 blue (038895-0000) (038888-0004) 12 cit-12 cet-12-2 yellow (038896-0000) (038890-0002) 8 cit-8 cet-8 red 4 cit-4 cet-4 blue 0 cit-0 cet-0 yellow insertion of contacts 1. before inserting the contacts, remove the endbell, grommets, and ferrule from the receptacle. remove the endbell, grommet, ferrule, and coupling nut from the plug. slide the hardware over the wire bundle in the proper order for reassembly after all the contacts are inserted. 2. to assist insertion of contacts, lubricate insert cavities with isopropyl alcohol. alcohol will evaporate and will not leave a conductive film. caution: never use any lubricant other than isopropyl alcohol. hold the plug or receptacle body firmly and insert the wired contacts as far as possible by hand. starting at one side of the insulator, work progressively from contact to contact across the layout. when inserting socket contacts, be sure to provide fixture space below the front face to permit length of guide pins for #16 and #12 contacts to clear insulator face. 3. place the correct insertion tool on the contact so that the wire runs along the groove in the tool. (tool tip will butt against the shoulder.) 4. beginning with a cavity on the outer edge of the plug, apply a slow, even pressure perpendicular to the insulator face until the contact snaps into position. if contacts are not inserted all the way prior to removing insertion tool, do not try to reinsert the insertion tool. instead, using the extraction tool, push the contact back to the position it was in when the insertion tool was originally placed over the contact for push-in; otherwise the inside of contact cavity may be damaged by reinserting the insertion tool. 5. inspect the front end of the insulator to assure that the contacts are inserted to the proper depth. completion after all the cavities have been filled, slide the hardware back into position on the barrel. tighten the endbell until the ferrule and endbell are flush. compression of the grommet in this manner results in maximum sealing characteristics of the plug. extraction of contacts 1. select the appropriate tool. (tool tips are reversible for either pin or socket.) place the extraction tool over the pin or into the socket. 2. apply a slow, even pressure to push the contact out of the rear of the insulator. recommended wire stripping contacts contact part numbers f80 contact size pin socket 16s 330-0345-016 031-0554-161 16 330-0351-016 031-0560-161 12 330-0351-012 031-0560-121 8 330-0351-008 031-0560-081 4 330-0351-004 031-0560-041 0 330-0351-000 031-0560-001 guide pins guide pins are used to assist insertion of socket contact sizes #16 and #12. larger sizes do not require guide pins. contact guide pin #16 226-1017-000 #12 226-1018-000 wire hole fillers wire itt cannon size awg part number color 20 225-1000-000 red 16/16s 225-0017-000 blue 12 225-0018-000 yellow 8 225-0019-000 white 4 225-8502-000 green 0 225-8503-000 black 035/025-tbc 006-tbc size 16 size 8 size 0 size 4 size 12 1/4" 1/4" 7/16" 11/16" 5/8" ca_a1-a163.qxd:layout 1 2/9/11 7:50 pm page 105

▲Up To Search▲

Price & Availability of 2-28UNEF-2B

	To Download 2-28UNEF-2B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .